Control Functions - Garrett Scorpion gold stinger Owner's Manual

CONTrOL FuNCTiONS

The Control Panel of your Gold Stinger has
four control knobs, two toggle switches
and one push button to regulate operation
of the detector. The Master (Mode) toggle
switch is on this Control Panel.
Depth (power)
This control on the upper right has three
functions:
1. Turning the instrument on and off
2. Testing batteries
3. Regulating detection depth
10
Rotate this knob clockwise to turn the
detector on and test batteries. Additional
rotation increases detection depth and
sensitivity. This control enables you to
detect to the greatest depth possible
in relation to conditions that affect the
sensitivity of your detector's signals.
Rotate the knob back to the left to
decrease or eliminate sounds created by
ground and/or atmospheric conditions.
Audio
This 10-turn control on the lower left
enables the operator to precisely adjust
the level of sound generated by the
detector. This audio level will determine
the amount of sound produced by the
detector when it is searching for and
signaling the presence of metal, either
over its built-in speaker or through
headphones. It is recommended that
the sound be adjusted at a threshold
level where it is barely discernible when
the detector is searching. Any increase
of sound caused by the detection of
11