Adsl Setup - D-Link DSL-2740R User Manual

Section 3 – Configuration
To access the ADSL Setup window, simply login to the Router or click either ADSL Setup in the Setup directory or Setup on the tool bar at the top
of the Web manager window. The Manual Setup check box is selected by default. If not, tick the check box to display the following window:
To configure the Router's basic configuration settings without running
the Setup Wizard, you can access the windows used to configure ADSL
Setup, LAN Setup, and Time and Date settings directly from the Setup
directory.
To access the ADSL Setup windows for Manual ADSL Connection
Setup for PPPoE/PPPoA, Dynamic IP Address, Static IP Address, and
Bridge Mode, click on the ADSL Setup link button on the left side of the
first window that appears when you successfully access the web
manager.
The section at the bottom of the window is the universal settings for the
ADSL Setup. If you are instructed to change the VPI or VCI values, type
in the values assigned for your account. Virtual Circuit and Service
Category drop-down list are set at their default values for now. These
can be used later if you are configuring multiple virtual circuits for your
ADSL service. Enter the PCR, SCR and MBS values if you are
instructed by your ISP.
Click the PPPoE/PPPoA radio button to access the first Manual ADSL
Connection Setup window:
D-Link DSL-2740R User Manual

ADSL Setup

21