When Connecting With A Dvi Cable - LG M1962D Owner's Manual

EXTERNAL EQUIPMENT SETUP

When connecting with a DVI cable

Connect the DVI output of the PC to the D D V V I I - - D D I I N N
1
jack on the set.
Connect the audio cable from the PC to the A A U U D D I I O O
2
I I N N ( ( R R G G B B / / D D V V I I ) ) sockets of the set.
!
NOTE
G If the set is cold, there may be a small "flicker" when the
set is switched on. This is normal, there is nothing
wrong with the set.
G If possible, use the 1360x768 @ 60 Hz video mode to
obtain the best image quality for your LCD monitor. If
used with other resolutions, some scaled or processed
pictures may appear on the screen. The set has been
preadjusted to the mode 1360x768 @ 60
Hz.( ( M M 1 1 9 9 6 6 2 2 D D ) )
G If possible, use the 1600x900 @ 60 Hz video mode to
obtain the best image quality for your LCD monitor. If
used with other resolutions, some scaled or processed
pictures may appear on the screen. The set has been
preadjusted to the mode 1600x900 @ 60
Hz.( ( M M 2 2 0 0 6 6 2 2 D D ) )
2 2 0 0
1
DVI OUTPUT
G If possible, use the 1920x1080 @ 60 Hz video mode
to obtain the best image quality for your LCD monitor.
If used with other resolutions, some scaled or
processed pictures may appear on the screen. The set
has been preadjusted to the mode 1920x1080 @ 60
Hz. ( ( M M 2 2 2 2 6 6 2 2 D D / / M M 2 2 3 3 6 6 2 2 D D / / M M 2 2 7 7 6 6 2 2 D D ) )
G Some dot defects may appear on the screen, like Red,
Green or Blue spots. However, this will have no impact
or effect on the monitor performance.
G Do not press the LCD screen with your finger for a long
time as this may produce some temporary distortion
effects on the screen.
Avoid keeping a fixed image on the set's screen for pro-
G
longed periods of time. The fixed image may become
permanently imprinted on the screen; use a screen
saver when possible.
AUDIO IN
(RGB/DVI)
2
AUDIO