Download
Share
Print this page
LG M2362D Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. TV
  5. M2362D
  6. Owner's manual

LG M2362D Owner's Manual

Monitor tv
Hide thumbs Also See for M2362D:

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
MONITOR TV
Please read this manual carefully before operating
your set and retain it for future reference.
MONITOR TV MODELS
M2362D
www.lg.com

Advertisement

loading

Related Manuals for LG M2362D

Summary of Contents for LG M2362D

  • Page 1 OWNER’S MANUAL MONITOR TV Please read this manual carefully before operating your set and retain it for future reference. MONITOR TV MODELS M2362D www.lg.com...
  • Page 2 PREPARATION FRONT PANEL CONTROLS This is a simplified representation of the front panel. The image shown may be somewhat different from your set. P P o o w w e e r r I I n n d d i i c c a a t t o o r r illuminates blue when the set is switched on.
  • Page 3 PREPARATION BACK PANEL INFORMATION This is a simplified representation of the back panel. The image shown may be somewhat different from your set. COMPONENT AV IN AUDIO IN (RGB/DVI) OPTICAL DIGITAL AUDIO OUT RGB IN (PC) HDMI IN 1 DVI-D IN (PC) AC IN ANTENNA/ CABLE IN...
  • Page 4 PREPARATION STAND INSTALLATION The image shown may be somewhat different from your set. Carefully place the product screen side down on a Insert the S S t t a a n n d d B B a a s s e e into the product cushioned surface that will protect product and screen from damage.
  • Page 5 PREPARATION DETACHING STAND The image shown may be somewhat different from your set. Detach the monitor to the S S t t a a n n d d B B a a s s e e by Place the set screen side down on a cushion or turning the screw to the left.
  • Page 6 PREPARATION DETACHING STAND BODY The image shown may be somewhat different from your set. Remove the Stand Body in the same way as the following when using it as a Wall Hook. 1. Remove the screw 2 point. 2. Pull the stand body.
  • Page 7 PREPARATION WALL MOUNT: HORIZONTAL INSTALLATION For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm 10 cm...
  • Page 8 PREPARATION POSITIONING YOUR DISPLAY The image shown may be somewhat different from your set. Adjust the position of the panel in various ways for maximum comfort. • • T T i i l l t t r r a a n n g g e e 15°...
  • Page 9 PREPARATION KENSINGTON SECURITY SYSTEM - The product is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. - For detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System.
  • Page 10 EXTERNAL EQUIPMENT SETUP To prevent equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket) ANTENNA/ Antenna...
  • Page 11 EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. The image shown may be somewhat different from your set. HD RECEIVER SETUP When connecting with a component cable Connect the SET-TOP outputs to the C C O O M M P P O O N N E E N N T T I I N N V V I I D D E E O O sockets (Y P ) on the set.
  • Page 12 EXTERNAL EQUIPMENT SETUP When connecting with a HDMI Connect the HDMI output of the digital set-top box to the HDMI IN 1 H H D D M M I I I I N N jack on the set. When connecting with a HDMI to DVI cable Connect the digital set-top box to H H D D M M I I I I N N jack on HDMI IN 1 the set.
  • Page 13 EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting with a component cable Connect the video output sockets (Y P ) of the DVD to the C C O O M M P P O O N N E E N N T T I I N N V V I I D D E E O O sockets (Y P ) of the set.
  • Page 14 EXTERNAL EQUIPMENT SETUP When connecting HDMI cable HDMI IN 1 Connect the HDMI output of the DVD to the H H D D M M I I I I N N jack on the set. NOTE Set can receive the video and audio signal simultaneously by using a HDMI cable. If the DVD player does not support Auto HDMI, you need to set the DVD output resolution appropriately.
  • Page 15 EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and set. Typically a still picture is shown on the VCR. If a user uses 4:3 picture format for a long time, an afterimage may remain on the sides of the screen.
  • Page 16 AV 1 AV 2 EXTERNAL EQUIPMENT SETUP W W h h e e n n c c o o n n n n e e c c t t i i n n g g w w i i t t h h a a R R C C A A c c a a b b l l e e AV IN Connect the audio/video out sockets of the VCR to AUDIO/VIDEO in sockets of the set.
  • Page 17 EXTERNAL EQUIPMENT SETUP PC SETUP This product provides Plug and Play capability, meaning that the PC adjusts automatically to the set's settings. When connecting with a D-sub 15 pin cable Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set.
  • Page 18 EXTERNAL EQUIPMENT SETUP When connecting with a DVI cable AUDIO IN (RGB/DVI) Connect the DVI output of the PC to the D D V V I I - - D D I I N N jack on the set. Connect the audio cable from the PC to the A A U U D D I I O O I I N N ( ( R R G G B B / / D D V V I I ) ) sockets of the set.
  • Page 19 EXTERNAL EQUIPMENT SETUP BACK COVER FOR WIRE ARRANGEMENT Tie cables together with a cable tie as shown in the illustration. Cable tie 1 1 8 8...
  • Page 20 EXTERNAL EQUIPMENT SETUP SUPPORTED DISPLAY RESOLUTION RGB/DVI[PC] Horizontal Vertical Resolution Frequency(kHz) Frequency(Hz) 720x400 31.468 31.469 640x480 37 .500 37 .879 800x600 46.875 48.363 1024x768 60.123 67 .500 1 152x864 63.981 1280x1024 79.976 64.674 1680x1050 65.290 75.000 1600x1200 66.587 1920x1080 HDMI[DTV] (Not Support PC) Horizontal Vertical Resolution...
  • Page 21 WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the set. POWER TV/PC INPUT POWER Switches the set on or off. TV/PC Selects TV or PC mode. TV/RADIO TEXT I/II MUTE...
  • Page 22 WATCHING TV /PROGRAMME CONTROL TELETEXT These buttons are used for teletext. POWER BUTTONS For further details, see the ‘Teletext’ section. TV/PC INPUT (Refer to the p.88 TV/RADIO TEXT I/II MUTE USB Menu Controls USB menu (Photo List and Music List) (Refer to the p.80) control buttons Q.MENU...
  • Page 23 WATCHING TV /PROGRAMME CONTROL TURNING ON THE TV - When your TV is turned on, you will be able to use its features. Firstly,connect the power cord correctly and check the main power( r / I )on the TV. S S e e t t I I D D : : O O f f f f In standby mode to turn TV on, press the INPUT or PR button on the TV or press the POWER button on the remote control and the TV will switch on.
  • Page 24 WATCHING TV /PROGRAMME CONTROL PROGRAMME SELECTION Press the P P R R + + or - - or NUMBER buttons to select a pro- gramme number. POWER TV/PC INPUT TV/RADIO TEXT I/II MUTE VOLUME ADJUSTMENT Press the VOL + + or - - button to adjust the volume. LIST Q.
  • Page 25 WATCHING TV /PROGRAMME CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. A A s s p p e e c c t t R R a a t t i i o o : Selects your desired picture format. A A u u d d i i o o : Selects the sound output.
  • Page 26 WATCHING TV /PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your set's OSD ( On Screen Display ) may differ slightly from what is shown in this manual. SETUP AUDIO PICTURE Move Move Move Auto tuning Auto Volume : Off Aspect Ratio : 16:9 Manual tuning Auto Bright : Off...
  • Page 27 WATCHING TV /PROGRAMME CONTROL AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming in digital mode, all previously stored service information will be deleted. SETUP SETUP Move Move Auto tuning A A u u t t o o t t u u n n i i n n g g Auto tuning A A u u t t o o t t u u n n i i n n g g All service-information will be updated.
  • Page 28 WATCHING TV /PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. SETUP SETUP Move Move Auto tuning Auto tuning Manual tuning M M a a n n u u a a l l t t u u n n i i n n g g Manual tuning M M a a n n u u a a l l t t u u n n i i n n g g Your receiver will add this...
  • Page 29 WATCHING TV /PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. SETUP SETUP Move Move Auto tuning Auto tuning Manual tuning M M a a n n u u a a l l t t u u n n i i n n g g Manual tuning M M a a n n u u a a l l t t u u n n i i n n g g Storage...
  • Page 30 WATCHING TV / PROGRAMME CONTROL Assigning a station name You can assign a station name with five characters to each programme number. Select the position and make MENU Select SETUP. your choice of the second character, and so on. You can use the alphabet A A to Z Z , the number 0 0 to 9 9 , +/ -, and Select Manual Tuning.
  • Page 31 WATCHING TV /PROGRAMME CONTROL PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using PR + / - button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu This function enables you to skip the stored programmes.
  • Page 32 WATCHING TV /PROGRAMME CONTROL IN DTV/RADIO MODE Skipping a programme number When a programme number is skipped, it means • Select a programme number to be skipped. that you will be unable to select it using the PR + / - button during normal TV viewing. •...
  • Page 33 WATCHING TV /PROGRAMME CONTROL IN TV MODE This function enables you to delete or skip the stored programmes. You can also move some channels to other programme numbers. Deleting a programme The selected programme is deleted, all the fol- • Select a programme number to be deleted.
  • Page 34 WATCHING TV /PROGRAMME CONTROL SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. SETUP SETUP Move Move Auto tuning Auto tuning Manual tuning Manual tuning Programme Edit Programme Edit O ff Software Update : On S S o o f f t t w w a a r r e e U U p p d d a a t t e e : : O O n n Software Update : On S S o o f f t t w w a a r r e e U U p p d d a a t t e e : : O O n n...
  • Page 35 This displays the signal information and service name of the selected MUX. (*MUX:A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.)) SETUP Move Engineering Diagnostics Auto tuning Manufacturer : LG Electronics Inc. Model/Type : M2362D-PT Manual tuning Software Version : V1.10.0 Programme Edit...
  • Page 36 WATCHING TV /PROGRAMME CONTROL SELECTING THE PROGRAMME TABLE You can check which programmes are stored in the memory by displaying the programme table. Programme List 1 ABC TV Sydney 9 Nine Digital 10 ABC 2 Displayed in the Locked Programme. RETURN Exit Displaying programme LIST...
  • Page 37 EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help navigate through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
  • Page 38 EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) Button Function in NOW/NEXT Guide Mode Select the Broadcast Programme. Change EPG mode. Enter Timer Record/Remind setting YELL Page Up/Down. YELL mode. GUIDE EXIT Enter Timer Record/Remind list mode. Switch off EPG. BLUE BLUE Change to the selected programme.
  • Page 39 EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) Button Function in Extended Description Box INFO i Text Up/Down. The detailed information on or off. GUIDE EXIT Enter Timer Record/Remind setting Switch off EPG. YELL YELL mode. Button Function in Remind Setting Mode Select Service, Date or Start time.
  • Page 40 PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, 4:3, 14:9. Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
  • Page 41 PICTURE CONTROL • C C i i n n e e m m a a Z Z o o o o m m • O O r r i i g g i i n n a a l l When your TV receives a wide screen signal, it Choose Cinema Zoom when you wish the pic- ture to be altered, both horizontally extended...
  • Page 42 PICTURE CONTROL AUTO BRIGHT When ON is selected, this function adjusts the screen brightness automatically, depending on the surrounding environment, to provide optimal viewing conditions. When OFF is selected, this function is turned off. PICTURE PICTURE Move Move Aspect Ratio : 16:9 Aspect Ratio : 16:9 O O f f f f Auto Bright : Off...
  • Page 43 PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset PICTURE Move Aspect Ratio : 16:9 Standard Standard Auto Bright : Off sRGB Picture Mode : Standard Picture Mode : Standard Cinema • Backlight 100 Sport • Contrast 100 Game • Brightness 50 PICTURE Move Expert 1...
  • Page 44 PICTURE CONTROL Auto Colour Tone Control (Warm/Medium/Cool) Choose one of three automatic colour adjustments. Set to warm to enhance warm colours such as red, or set to cool to see less intense colours with more blue. PICTURE PICTURE Move Move •...
  • Page 45 PICTURE CONTROL Auto Colour Tone Control (6500K/9300K) (RGB,DVI mode only) Advanced control menu is inactivated when picture mode is sRGB. Choose one of two automatic colour adjustments. PICTURE PICTURE Move Move • Backlight 100 • Backlight 100 • Contrast 100 •...
  • Page 46 PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode-User option PICTURE Move Aspect Ratio : 16:9 Standard (User) Standard Auto Bright : Off sRGB Picture Mode : Standard Picture Mode : Standard (User) Cinema • Backlight 100 Sport • Contrast 100 Game •...
  • Page 47 PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY D D y y n n a a m m i i c c C C o o n n t t r r a a s s t t Optimizes the contrast automatically according to the brightness of the reflection. D D y y n n a a m m i i c c C C o o l l o o u u r r Adjusts the colour of the reflection automatically to reproduce natural colurs as close as possible.
  • Page 48 PICTURE CONTROL ADVANCED - BLACK (DARKNESS) LEVEL When you view a film, this function adjusts the set to the best picture quality. This function works in the following mode: AV (NTSC-M), HDMI or Component. PICTURE PICTURE Move Move • Backlight 100 •...
  • Page 49 PICTURE CONTROL ADVANCED - FILM MODE To set the product up for the best picture quality for viewing films. This feature operates only in TV, AV and Component 480i/576i/1080i mode. PICTURE PICTURE Move Move • Backlight 100 • Backlight 100 Colour Temperature Medium •...
  • Page 50 PICTURE CONTROL Expert Picture Control By segmenting categories, E E x x p p e e r r t t 1 1 and E E x x p p e e r r t t 2 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users.
  • Page 51 PICTURE CONTROL Adjusts the contrast to keep it at the best level according to the brightness D D y y n n a a m m i i c c C C o o n n t t r r a a s s t t of the screen.
  • Page 52 PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE PICTURE Move Move • Backlight 100 • Backlight 100 • Contrast 100 • Contrast 100 • Brightness 50 • Brightness 50 • Sharpness 70 •...
  • Page 53 PICTURE CONTROL SCREEN SETUP FOR PC MODE Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] mode. <Vertical resolution : 768> SCREEN Move Prev.
  • Page 54 PICTURE CONTROL Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. A A u u t t o o c c o o n n f f i i g g u u r r e e This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.
  • Page 55 PICTURE CONTROL Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still shaky, adjust the picture phase manually. This function works in the following mode: RGB[PC]. PICTURE Move SCREEN Move RETURN Prev.
  • Page 56 PICTURE CONTROL Screen Reset Returns Position, Size and Phase to the default factory settings. This function works in the following mode: RGB[PC]. PICTURE Move SCREEN Move RETURN Prev. • Contrast 100 Resolution • Brightness 50 Auto Config. • Sharpness • Colour To Set Position •...
  • Page 57 SOUND CONTROL AUTO VOLUME LEVELER AVL automatically remains on the same volume level if you change programmes. Because each broadcasting station has its own signal conditions,volume adjustment may be needed very time the channel is changed.This feature allows users to enjoy stable volume levels by making automatic adjustments for each programme.
  • Page 58 SOUND CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO AUDIO Move Move Auto Volume : Off Auto Volume : Off Clear Voice II : Off Clear Voice II : Off Clear Voice II : Off Clear Voice II : Off •...
  • Page 59 SOUND CONTROL BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO AUDIO Move Move Auto Volume : Off Auto Volume : Off Clear Voice II : Off Clear Voice II : Off • Level • Level •...
  • Page 60 SOUND CONTROL PRESET SOUND SETTINGS - SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport and Game and you can also adjust Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the set the appropriate sound options based on the programme content.
  • Page 61 SOUND CONTROL SOUND SETTING ADJUSTMENT - USER MODE Adjusting the audio Treble and Bass. AUDIO AUDIO Move Move Auto Volume : Off Auto Volume : Off Clear Voice II : Off Clear Voice II : Off • Level • Level Balance Balance S S t t a a n n d d a a r r d d ( ( U U s s e e r r ) )
  • Page 62 SOUND CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO AUDIO Move Move Balance Balance Sound Mode : Standard Sound Mode : Standard • Treble • Treble • Bass • Bass • • R R e e s s e e t t •...
  • Page 63 SOUND CONTROL SELECTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. Auto -allows original output DOLBY Digital if a channel is broadcast with Dolby Digital audio. PCM -forces stereo PCM output. When Dolby digital is available,selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace)output to Dolby Digital.
  • Page 64 SOUND CONTROL TV SPEAKERS ON/ OFF SETUP You can adjust the internal speaker status. In AV, COMPONENT, HDMI, RGB, DVI mode the TV speaker can be operational even though when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV internal speakers. AUDIO AUDIO Move...
  • Page 65 SOUND CONTROL I/II Stereo Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. I/II Select the sound output. O O n n S S c c r r e e e e n n D D i i s s p p l l a a y y B B r r o o a a d d c c a a s s t t Mono MONO...
  • Page 66 TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the set has no DTV signal.) You must set the time correctly before using on/off timer function. When you select a Time Zone city,the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time)which is received with the broadcast signal and the time is set automatically by a digital signal.
  • Page 67 TIME SETTING AUTO ON/OFF TIMER SETTING The Off time function automatically switches the set to standby at a preset time. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed.
  • Page 68 TIME SETTING AUTO SHUT-OFF SETTING If the set is switched on and there is no input signal, it will switch off automatically after 10 minutes. TIME TIME Move Move Clock Clock Off Time : Off Off Time : Off On Time : Off On Time : Off...
  • Page 69 TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set off after the preset time has elapsed. MENU Select T T I I M M E E . Select S S l l e e e e p p T T i i m m e e r r .
  • Page 70 OPTION SETTING Subtitle (This menu is enabled only in DTV mode) This function allow users to see subtitle at Digital TV mode. OPTION OPTION Move Move Subtitle Subtitle : Off : Off Subtitle Subtitle : Off : Off Input Label Input Label Key Lock : Off...
  • Page 71 OPTION SETTING INPUT LABEL Selects a label for each input source. OPTION OPTION Move Move Subtitle : Off Subtitle : Off Input Label I I n n p p u u t t L L a a b b e e l l Input Label I I n n p p u u t t L L a a b b e e l l Component...
  • Page 72 OPTION SETTING KEY LOCK The set can be configured so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing. OPTION OPTION Move Move Subtitle : Off Subtitle : Off Input Label Input Label K K e e y y L L o o c c k k Key Lock...
  • Page 73 OPTION SETTING POWER INDICATOR Select the power indicator on of off. P P o o w w e e r r i i n n d d i i c c a a t t o o r r O O n n - Normal Mode : Blue LED On.
  • Page 74 OPTION SETTING DDC CI(Only RGB, DVI mode) DDC/CI (Display Data Channel Command Interface) is a communication protocol for communications between PC and set. DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the set OSD Set can be adjusted with PC by connecting communication between PC and set when DDC/CI is ON, and set cannot be adjusted with PC because communication between PC and set is disconnected when DDC/CI is OFF.
  • Page 75 OPTION SETTING MODE SETTING We recommend setting the set to “Home Use” mode for the best picture in your home environment. “Store Demo” mode is an optimal setting for displaying at stores. OPTION Move Mode Setting Subtitle : Off Input Label Selecting the environment.
  • Page 76 OPTION SETTING Initializing (Reset to original factory settings) This function operates in current mode. To initialize the adjusted value. When the Lock System menu is “On”, the message to enter the password appears. OPTION OPTION Move Move Subtitle : Off Subtitle : Off Input Label...
  • Page 77 PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’ , ‘0’ , ‘0’ , ‘0’ on the remote control handset. Revitalize Block Programme, Parental Guidance and Input Block function. LOCK LOCK Move Move L L o o c c k k S S y y s s t t e e m m : : O O f f f f L L o o c c k k S S y y s s t t e e m m : : O O f f f f...
  • Page 78 PARENTAL CONTROL / RATINGS BLOCK PROGRAMME Blocks any programmes that you do not want to watch or that you do not want your children to watch. This function is available in Lock System “On”. Enter a password to watch a blocked programme. ABC TV Sydney RADIO LOCK...
  • Page 79 PARENTAL CONTROL / RATINGS PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off.
  • Page 80 PARENTAL CONTROL / RATINGS INPUT BLOCK Enables you to block an input. LOCK LOCK Move Move Lock System : Off Lock System : Off Set Password Set Password Component Block Programme Block Programme Parental Guidance : Off Parental Guidance : Off HDMI1 Input Block Input Block...
  • Page 81 TO USE A USB DEVICE When connecting a USB device When you connect a USB device, this pop up menu is displayed, automatically. If the Pop Up menu does not appear, you can select Music List or Photo List in the USB menu. “POP UP MENU”...
  • Page 82 TO USE A USB DEVICE PHOTO LIST The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. PHOTO( * .JPEG) supporting file Baseline: 15360 8640 Progressive format : 1024 x 768 •...
  • Page 83 TO USE A USB DEVICE Photo Selection and PopUp Menu USB Device Photo List Page 2/3 No Marked Free Space 150MB Drive1 Up Folder KR103 KR101 KR104 KR102 KR105 JMJ001 JMJ005 JMJ002 JMJ006 1366 768, 1 25KB JMJ003 JMJ007 Up Folder JMJ004 JMJ008 Navigation...
  • Page 84 TO USE A USB DEVICE Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen. USB Device Photo List Page 2/3 No Marked...
  • Page 85 TO USE A USB DEVICE Select the S S l l i i d d e e s s h h o o w w , B B G G M M , ( ( R R o o t t a a t t e e ) ) , D D e e l l e e t t e e , O O p p t t i i o o n n or H H i i d d e e .
  • Page 86 TO USE A USB DEVICE MUSIC LIST Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*.MP3) supporting file Bit rate 32 to 320kbps •...
  • Page 87 TO USE A USB DEVICE Music Selection and PopUp Menu As shown , up to 6 music titles are listed per page. USB Device Music List No Marked Page 2/3 Free Space 150MB Duration Title Music Up Folder 1:340, 1 20KB P P l l a a y y (During stop) : Play the selected music titles.
  • Page 88 TO USE A USB DEVICE If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.
  • Page 89 TELETEXT (IN DIGITAL MODE ONLY) T T h h i i s s f f e e a a t t u u r r e e i i s s n n o o t t a a v v a a i i l l a a b b l l e e i i n n a a l l l l c c o o u u n n t t r r i i e e s s . . Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
  • Page 90 TELETEXT FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the correspond- ing coloured button. Page selection Press the T T . . O O P P T T button and then use button to select menu.
  • Page 91 APPENDIX TROUBLESHOOTING T T h h e e o o p p e e r r a a t t i i o o n n d d o o e e s s n n o o t t w w o o r r k k n n o o r r m m a a l l l l y y . . Check to see if there is any object between the product and the remote control causing obstruction.
  • Page 92 APPENDIX T T h h e e a a u u d d i i o o f f u u n n c c t t i i o o n n d d o o e e s s n n o o t t w w o o r r k k . . Press the VOL + + or - - button.
  • Page 93 Install the product driver, which is provided with the product, or download it from the web site. Did you install the driver? (http://www.lg.com) See if the plug_&_play function is supported by referring to the video card user’s guide. A A f f t t e e r r - - i i m m a a g g e e a a p p p p e e a a r r s s o o n n t t h h e e p p r r o o d d u u c c t t . .
  • Page 94 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new set. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen To keep the dust off your screen for a while, wet a soft cloth in a mixture of lukewarm water and a little fab- ric softener or dishwashing detergent.
  • Page 95 APPENDIX PRODUCT SPECIFICATIONS Screen Type LCD Panel 584.2 mm Wide (23 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size : 584.2 mm Pixel Pitch 0.265 mm (H) x 0.265 mm (V) Video Signal Max. Resolution 1920 X 1080 @60 Hz Recommended Resolution 1920 X 1080 @60 Hz...
  • Page 96 APPENDIX IR CODES 1. How to Connect Connect your wired remote control to the Remote Control port on the set. 2. Remote Control IR Codes Output waveform Single pulse, modulated with 37 .917 KHz signal at 455 KHz Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 Configuration of frame...
  • Page 97 APPENDIX C C o o d d e e ( ( H H e e x x a a ) ) F F u u n n c c t t i i o o n n N N o o t t e e PR + + R/C BUTTON PR - -...
  • Page 98 APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an RS-232C IN (CONTROL & SERVICE) external control device (such as a computer or an A/V control system) to control the product’s functions exter- nally. Connect the serial port of the control device to the RS- 232C jack on the product back panel.
  • Page 99 APPENDIX Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’ . p p . . 1 1 0 0 2 2 OPTION OPTION Move Move Subtitle : Off Subtitle : Off Input Label Input Label Key Lock : Off...
  • Page 100 APPENDIX Communication Parameters Baud rate : 9600 bps ( UART ) Stop bit : 1 bit Data length : 8 bits Communication code : ASCII code Parity : None Use a crossed (reverse) cable. Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA...
  • Page 101 APPENDIX 0 0 1 1 . . P P o o w w e e r r ( ( C C o o m m m m a a n n d d : : k k a a ) ) 0 0 4 4 .
  • Page 102 APPENDIX 0 0 9 9 . . T T i i n n t t ( ( C C o o m m m m a a n n d d : : k k j j ) ) 1 1 3 3 . . T T r r e e b b l l e e ( ( C C o o m m m m a a n n d d : : k k r r ) ) To adjust the screen tint.
  • Page 103 APPENDIX 2 2 0 0 . . K K e e y y ( ( C C o o m m m m a a n n d d : : m m c c ) ) 1 1 7 7 . . A A u u t t o o C C o o n n f f i i g g u u r r e e ( ( C C o o m m m m a a n n d d : : j j u u ) ) To send IR remote key code.
  • Page 104 Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.