Snmp > Rmon > Rmon History; Snmp > Rmon > Rmon Alarm - D-Link Web Smart Switch DGS-1210-16 Reference Manual

Configuration
The RMON Ethernet Statistics Configuration contains the following fields:
Index (1 ~ 65535): Indicates the RMON Ethernet Statistics entry number.
Port: Specifies the port from which the RMON information was taken.
Owner: Displays the RMON station or user that requested the RMON information.
Click Add to create a new entry. Click Refresh to renew the table information. Click Delete to remove the
corresponding entry.
SNMP > RMON > RMON History
The RMON History Control Configuration window contains information about samples of data taken from
ports. For example, the samples may include interface definitions or polling periods.
The History Control Configuration contains the following fields:
Index (1 ~ 65535): Indicates the history control entry number.
Port: Specifies the port from which the RMON information was taken.
Buckets Requested (1 - 50): Specifies the number of buckets that the device saves.
Interval (1 - 3600): Indicates in seconds the time period that samplings are taken from the ports. The field
range is 1-3600.
Owner: Displays the RMON station or user that requested the RMON information.
Click Add to create a new entry. Click Delete to remove the corresponding entry.
SNMP > RMON > RMON Alarm
The RMON Alarm Settings window allows the user to configure the network alarms. Network alarms occur
when a network problem, or event, is detected.
Figure 4.104 – SNMP > RMON > RMON Ethernet Statistics Configuration
Figure 4.105 – SNMP > RMON > RMON History Control Settings
D-Link Web Smart Switch User Manual
8 6
8 6