Hotel Mode Function; To Reset The Hotel Mode - JVC LT-22HG45E Service Manual

HOTEL MODE FUNCTION

To set the Hotel mode, please follow the steps below.
1. Press the MENU ---> 1147 button on the remote control.
2. Press the DOWN button on the remote control,
3. Select the "Setup" menu , then press ENTER button.
4. Select the "Hotel Mode" menu, Select "ON".
5. The Hotel mode setting menu will appear.
6. Using the UP/DOWN button on the remote control,
select the desired mode. Then press the ENTER button.
Using the LEFT/RIGHT button on the remote control,
7.
set the mode to desired setting.
8. The Hotel mode has now been set up.
To reset the Hotel mode, please follow the steps below.
1. Press the MENU ---> 1147 button on the remote control.
2. Press the DOWN button on the remote control,
3. Select the "Setup" menu , then press ENTER button.
4. Select the "Hotel Mode" menu.
4. Select the "Hotel Mode" menu.
5. The setting items has now been returned to initial value.
Setting item
ANTENNA/CABLE/AV
Source Lock COMPONENT/SCART/
PC/HDMI/USB
ANTENNA/CABLE/AV
Default Source COMPONENT/SCART/
PC/HDMI/USB
ANTENNA/CABLE/AV
Channel Type
COMPONENT/SCART/
PC/HDMI/USB
Default Program
Max volume
Default Volume
Clone to USB
Restore from USB
Setting value Initial value
1~21
0~100
0~50
Hotel mode
Source Lock
Default Source
Channel Type
Default Program
Max Volume
Default Volume
Clone to USB
Restore from USB
Setting Input skip, combine with "Default Source".
Setting Input Source, combine with "Source Lock"
OFF
If select "Source Lock" for this function disappear.
1 Setting of the CH if select "Default Source" to TV input.
21 Setting of the CH if select "Default Source" to TV input.
100 Setting of the maximum volume value.
50 Setting volume at Power on.
Setting of the Hotel Mode return factory setting.
Setting of the Password.
On
Off
All
1
FUNCTION
<>
>>
<>
<>
<>
100
50
>>
>>