X42 Headset - Turtle Beach Ear Force X42 User Manual

X42 Headset

POWER
1
6
5
7
1
ON - BASS BOOST EFFECTS - OFF
2 3 4
1
Power Button: To turn on the headset, press and
hold the power button for a couple of seconds, then
release. You will hear 2 beeps and the power LED
should start flashing. Turn off the headset by pressing
the button until the LED stays on and you hear 2 beeps,
then release. To enter Pairing Mode, power off the
headset, then press and hold the power button for
about 6 seconds until you hear the second double
beep and the LED begins to flash rapidly (see pg 4).
The headset will turn off after several minutes if there's
no audio detected or if the transmitter is turned off.
2
Xbox Controller Jack: Insert the straight connector on
the Talkback Cable here. (see pg. 8)
3
Effects Button: Press this button to activate the
different EQ presets. A beep will indicate which
preset is selected. (see pg. 14)
4
Game Volume: Turn to adjust the game sound level.
The Xbox LIVE chat volume may be independently set
by the volume control on the Talkback Cable.
5
Power LED: Flashes about once per second when
power is on. Flashes quickly (twice per second) when
in Pairing Mode (see pg. 4).
6
Microphone jack: Insert the removable mic boom
here. The jack is notched to prevent the boom from
rotating after insertion.
7
To properly position the mic: To properly position the
mic: Remove the foam cover, then insert the boom into
the jack so the holes on the mic casing are facing your
mouth. Then replace the foam cover. The boom plug
also has a marker to indicate the proper mic position.