Pioneer VSX-D914-K Service Manual page 83

5
The following DVR controls can be accessed
by pressing SHIFT:
¶ REC
Starts recording.
REC STOP
Stops recording.
HDD/DVD
These buttons switch between the hard
disk and DVD controls for DVD/HDD
recorders.
9 RECEIVER CONTROL buttons
STANDARD
Press for Standard decoding and to
switch between the various Pro Logic IIx
and Neo:6 options).
ADV. SURR.
Use to switch between the various
surround modes.
STEREO
Switches between direct and stereo play-
back. Direct playback bypasses the tone
controls and channel levels for the most
accurate reproduction of a source.
SLEEP
Use to put the receiver in sleep mode and
select the amount of time before the
receiver turns off.
MIDNIGHT/LOUDNESS
Switches to Midnight or Loudness
listening.
TEST TONE
Sounds the test tone when setting up the
surround sound of the receiver.
CH SELECT
Selects a speaker when setting up the
surround sound of the receiver.
5
6
LEVEL +/–
Adjusts the levels of the surround sound
of the receiver.
EFFECT +/–
Adds or subtracts the amount of effect
with different advanced surround modes.
10 SHIFT
Press to access the DVR controls above the
component control butttons.
11 SOURCE
Press to turn on/off other components
connected to the receiver.
12 Character display (LCD)
This display shows preset codes and other
information when transmitting control
signals.
The following commands are shown when
you're setting the remote to control other
components (see Controlling the rest of your
system):
SETUP
Indicates the setup mode, from which you
choose the options below.
PRESET
See Selecting preset codes directly.
LEARN (VSX-D914 model only)
See Programming signals from other
remote controls.
DIRECT F
See Direct function.
ERASE (VSX-D914 model only)
See Erasing one of the remote control
button settings.
RESET
See Erasing all of the remote control
presets.
READ ID
See Confirming preset codes.
13 RECEIVER
Switches the remote to control the receiver
(used to select the features above the number
buttons (INPUT ATT, etc). Also use this
button to set up surround sound.
14 MASTER VOLUME +/–
Use to set the listening volume.
VSX-D914-K
6
7
7
8
A
B
C
D
E
F
83
8