Pioneer VSX-D914-K Service Manual page 80

1
Display
1
A
B
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO
Lights when AUTO signal select is on.
SB
Depending on the source, this lights
when a signal with surround back
C channel encoding is detected.
DIGITAL
Lights when a digital audio signal is
detected.
2 DIGITAL
Lights when a Dolby Digital encoded
signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded
D
audio signals is detected.
2
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a DTS
signal.
2 DIGITAL
3
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital signal.
4 2 PRO LOGIC II (x)
When the (STANDARD) Pro Logic II mode of
E
the receiver is on, this lights to indicate Pro
Logic II decoding. The x lights to indicate Pro
Logic IIx decoding (see Listening in surround
sound for more on this).
5 VIR.SB
Lights during Virtual surround back
processing.
6 DIRECT
Lights when source direct playback is
selected. Direct playback bypasses the tone
controls and channel levels for the most accu-
rate reproduction of a source.
F
80
1
2
2 3 4
x
11 12 13
VSX-D914-K
2
3
5 6 7 8
14
7 MIDNIGHT
Lights during Midnight listening.
8 SLEEP
Lights when the receiver is in sleep mode.
9 ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the analog input signal.
10 Speaker indicator
Shows the speaker system currently in use.
11 Character display
12 Neo:6
When the (STANDARD) NEO:6 mode of the
receiver is on, this lights to indicate NEO:6
processing.
13 ADV.SURR. (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
14 LOUDNESS
Lights when LOUDNESS has been selected.
15 TUNER indicators
STEREO
Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO
Lights when the mono mode is set using
the MPX button.
TUNED
Lights when a broadcast is being
received.
16 Master volume level
Shows the overall volume level. ---dB indi-
cates the minimum level, and - 0 dB indicates
the maximum level.
Depending on your level settings for each
channel, the maximum volume can range
between –10 dB and –0 dB.
3
4
9 10
15 16
4