Table of Contents
Advertisement
may be impossible to watch one service while recording. You
can copy entries of one tuner's services list to the other tuner's
services list to avoid such inconvenience.
To copy service entries, select the Installation > Services Copy
menu. There are three copy options. To copy service entries
of the first tuner to the second tuner's services list, select the
Tuner 1 to Tuner 2 option. To copy on the contrary, select the
Tuner 2 to Tuner 1 option. To copy reciprocally, select the ALL
option.
3.3 Editing the transponder list
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Choose your desired transponder at the Frequency op-
tion.
3. Change the Polarization option to match to that of your
desired transponder.
4. Set the Modulation option to match to that of your de-
sired transponder. If the transponder is of the DVB-S2
standard, you should set this option to DVB-S2 QPSK or
DVB-S2 8PSK. Then the FEC option and the Pilot option
will become enabled. You also should set these options
correctly.
3.3 Editing the transponder list 29
If you failed to receive services of
a transponder because it consists
of wrong data, you can solve it
by correcting the data. Select the
Installation > SAT/TP Edit menu.
To change the data of a trans-
ponder, take the following steps:
3
Advertisement
Table of Contents
