Table of Contents
Advertisement
Installer Setting -Test Run Mode
1. Cassette type
After installing the product, you must run a Test Run mode.
For details related to this operation, refer to the product manual.
1
2
Floor Standing type
Push the temperature low key and On/Off
Key For over 3 sec simultaneously indoor
side
❊ 18˚C cooling, High Fan Speed, Airflow direction mode will be operated during 18 minutes with ignoring
room temperature.
❊ After running 18 minutes under test run mode, system will automatically turn OFF.
❊ In case of duct type, the Airflow UP/DOWN function is not displayed.
❊ During test run mode, receiving signal from wireless remote controller will release this operation.
If you press any kind of button, Test Run mode will be released.
1
Keep pressing
secs to enter installer setting mode until
code displayed in timer segment.
Function Code
2
Press
button to start.
Test running
button setting for 4
Set
FAN
ON
SPEED
OFF
MODE
Installation Manual 31
Advertisement
Table of Contents
