Positioning The Microphone; Using The Clothing Clip - Shure Computer Headset User Manual

HEADSET MICROPHONE SETUP
1. The headset features a collapsible boom for shipment and storage.
Before wearing the headset, unfold the boom until it snaps and locks into
place. Refold for storage or transportation.
2. Place the headset wireframe around the head so that the wireframe and
elastic band are horizontal across the back of the head and the ends
of the wireframe fit over and in front of the ears (see Figure 7).
WEARING THE HEADSET
3. If the headset feels loose or uncomfortable, carefully bend the sides of the
wireframe to make it tighter or looser (Figure 8A). The angle of the wire-
frame earpieces may also need adjustment (Figure 8B).
A
ADJUSTING THE WIREFRAME
6
FIGURE 7
B
FIGURE 8

POSITIONING THE MICROPHONE

IMPORTANT: For maximum gain before feedback, position the gooseneck so
that the microphone grille (silver side) is within 25 mm (1 inch) of the right cor-
ner of the mouth. Do NOT position it directly in front of the mouth (see
Figure 9).
POSITIONING THE MICROPHONE

USING THE CLOTHING CLIP

The supplied spring-loaded clothing clip secures the microphone cable to
the user's clothing and keeps it from becoming entangled with the user's
movements.
CABLE
CLOTHING CLIP
USING THE CLOTHING CLIP
CONNECTING THE HEADSET TO THE TRANSMITTER
1. Insert the headset microphone cable connector into the transmitter input
jack.
2. If desired, use the spring-loaded clothing clip to secure any slack from the
microphone cable to your clothing.
FIGURE 9
FIGURE 10
7