Wide Mode; Audio Only - Sharp LC-20SH3H Operation Manual

Useful Features (Continued)

WIDE MODE

You can select the picture display size for the playback
image of the DVD player from the following four modes:
"4:3", "16:9", "ZOOM" and "STRETCH".
1
Press MENU to display the Menu screen.
2
Press \/| to select "FEATURES".
3
Press '/" to select "WIDE MODE", and press OK.
4
Press '/" to select the desired setting, and press OK.
4 : 3
1 6 : 9
Z O O M
S T R E T C H
5
Press MENU to exit.
Selected item
4:3 Displays the image in a 4:3 size.
16:9 Stretches the image horizontally to display it in a
16:9 size.
ZOOM Displays the centre part of the image by enlarging
it in the horizontal and vertical directions.
STRETCH Stretches the image horizontally.
Image type 4:3
(For an image
stretched vertically)
(For an image
stretched vertically
with bands at the left
and right sides)
(For a 4:3 image)
NOTE
• The 4:3 image will be distorted on the screen when the "WIDE MODE"
is set to "16:9".
18
Description
16:9 ZOOM STRETCH

AUDIO ONLY

When listening to music from a music programme, you can
turn the display off and enjoy audio only.
1
Press MENU to display the Menu screen.
2
Press \/| to select "FEATURES".
3
Press '/" to select "AUDIO ONLY", and press OK.
4
Press '/" to select "DISPLAY OFF", and press OK.
D I S P L A Y O N
D I S P L A Y O F F
Selected item
DISPLAY ON Both screen images and audio are output.
DISPLAY OFF Audio is output without screen image.
Description