Samsung 9000 Series User Manual page 41

QUICK START
GUIDE
111111111~111111111101111111111111
BN68-05427 A-00
Attach the
TV
to
the Stand
Connect video
devices
Insert the
batteries into the
remote control
Power on and
start the initial
setup
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV
by the edges, as shown .
Step 7 Attach the TV to the Stand
2
Open the package, and take the cushioning out
of it.
Put a base, legs and screws off to assemble the
stand out of the box.
- - - ---------------------------------------------
:: ( f ,
Base Leg
I!:
a
Screws
'--------------------------------------------------------·
~ Base may differ depending on the model.
~
Accessories may be located at different positions,
depending on the model.
Fit the base and legs together, making sure that
the legs are correctly aligned with the base. See
the diagram below.
~ Base may differ depending on the model.
Insert 2 screws through the base into each leg
as shown, and then secure the legs to the base
with
a
screwdriver.
~ Base may differ depending on the model.
r·--------------------------
Welcome to your new Smart TV!
The fo llowing inst ruct ions cover assembling, connecting, and setting up your new TV. Make
sure you h ave t he accessories listed below.
Included in the box
Remote Control
SmartT ouch Control
Batteries (AAA x 4)
5
~x4(M4XL12)
8
Stand Parts and Cables
Power cord
RCA Adapter x
2
a
Component adapter One connect
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
Holding the stand parallel to the screen, slide
the stand legs into the notches on the back of
the TV.
Insert 4 screws and secure the stand to the TV.
~
Base may differ depending on the model,
When placing the product on a console or shelf,
make sure that the stand does not protrude
beyond the edge of the console or shelf. This
may cause the product to fall off and result in a
malfunction or injury.