CITROEN C4 2004 Handbook page 198

CHECKING AND SETTING THE VALVE TIMING
Engines: 9HX - 9HY - 9HZ
Checking and setting the timing (continued).
Turn the engine in the normal direction of rotation until the peg [1] engages in the setting hole.
Peg the flywheel at «b», using tool [1].
Move aside the electrical harness (6).
Remove:
- The engine support (7).
B1BP305C
- The screw (8).
- The accessories drive pulley (9).
- The lower timing cover (10).
- The upper timing cover (11).
- The tool [1].
Refit the screw (8).
Rotate the crankshaft to bring the camshaft to its pegging point.
Peg:
- The camshaft at «c», using tool [2] (oil the pegs).
- The fuel high pressure pump pulley (15) at «f» using a 5 mm diameter peg.
WARNING: Do not touch or damage the track of the engine speed sensor target (14).
B1EP1HJD
195