Zte Telstra pulse User Manual page 9

CHARGE THE BATTERY
• Only use the AC charger and USB lead supplied.
• Insert the charger lead carefully.
• Check the plug and socket are aligned correctly.
• Do NOT use excessive force which may damage the USB port.
• Be careful to avoid tripping or pulling on the lead whilst it is
plugged in.
• Physical damage to the USB port is NOT covered by warranty.
• The phone can also be charged by connecting it to a computer
using the USB lead supplied.
• The phone can be charged in the ON or OFF state. When
switched OFF "Charging" is displayed. When switched ON the
battery icon animates until fully charged.
• If the phone is off after charging press the power key to switch it
on.
• Avoid high temperatures and direct sunlight. The battery will not
charge when over 45°C
9