Alignments - Philips S42SD-YD09 Service Manual

8. Alignments

Index of this chapter:
8.2 Waveform Alignments 42" SD v5
8.3 Waveform Alignments 42" HD w1
8.4 Waveform Alignments 50" HD w1
Note:
• Figures can deviate due to the different model executions.
8.1.2 Adjustment Power Supply Voltages 42" SD v5
Table 8-1 Adjustment voltage level overview (also refer to the sticker on the rear side of the panel)
No Output voltage (V)
1 VS
2 VA
3 VE
4 VSET
5 VSCAN
6 VSB
7 VG
8 D5VL
9 D3V3
Check voltage label on the PDP for correct values.
Figure 8-1 Location of potentiometers and test points on the PSU
Voltage Setting (Normal Load)
207 V ± 1 %
65 V ± 1.5 %
110 V ± 1.5 %
201 V ± 1.5 %
-190 V ± 1.5 %
5 V ± 5 %
15 V ± 5 %
5.2 V ± 5 %
3.3 V ± 5 %
Alignments SDI PDP
Important: Remove all non-default jumpers and reset all DIP
switches, after the repair!
8.1 Power Supply Voltages
8.1.1 Location of potmeters and test points
Output Voltage Range
195 V ~ 215 V
50 V ~ 70 V
70 V ~ 110 V
180 V ~ 210 V
-190 V ~ -170 V
Fixed
Fixed
Fixed
Fixed
8. EN 49
G_16380_225.eps
120606