Zenith P50W28A Series Service Manual page 15

EXTERNAL CONTROL DEVICE SETUP
20. Color Temperature (Command:u)
G To adjust color temperature.
You can also adjust ACC in the Video menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Normal 1: Cool
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 0: Normal 1: Cool
21. Red Adjustment (Command:v)
G To adjust red in color temperature.
Transmission
[k][v][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•
Refer to 'Real data mapping 2'. See page 25.
Acknowledgement
[v][ ][Set ID][ ][OK][Data][x]
Data Min: 0 ~ Max: 64
22. Green Adjustment (Command:w)
G To adjust green in color temperature.
Transmission
[k][w][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•
Refer to 'Real data mapping 2'. See page 25.
Acknowledgement
[w][ ][Set ID][ ][OK][Data][x]
Data Min: 0 ~ Max: 64
23. Blue Adjustment (Command:$)
G To adjust blue in color temperature.
Transmission
[k][$][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•
Refer to 'Real data mapping 2'. See page 25.
Acknowledgement
[$][ ][Set ID][ ][OK][Data][x]
Data Min: 0 ~ Max: 64
24. PIP Input Select (Command:y)
G To select input source for sub picture in PIP mode.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 0: RGB1 1: COMPONENT
2: VIDEO 3: S-VIDEO
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
Data 0: RGB1 1: COMPONENT
2: VIDEO 3: S-VIDEO
2: Warm 3: User
2: Warm 3: User
4: RGB2
4: RGB2
25. Orbiter (Command:p)
G To control the orbiter function on/off.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 0: Orbiter off
1: Orbiter on
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
Data 0: Orbiter off
1: Orbiter on
26. White Wash (Command:q)
G To control the white wash function on/off.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data 0: White Wash off
1: White Wash on
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Data 0: White Wash off
1: White Wash on
27. Orbiter Time Setting (Command:r)
G To adjust orbiter operation time term.
Transmission
[j][r][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: FE
•
Refer to 'Real data mapping1'. See page 25.
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
Data Min: 1 ~ Max: FE
28. Orbiter Pixel Setting (Command:s)
G To adjust pixel number in orbiter function.
Transmission
[j][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 9
•
Refer to 'Real data mapping1'. See page 25.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
Data Min: 0 ~ Max: 9