Memory Storage; Storing Independent Transmit Frequency ("Odd Splits"); Memory Recall - Yaesu VX-8GE Operating Manual

M M
EMORY
S I
TORING NDEPENDENT
All memories can store an independent transmit frequency, for operation on repeaters
with non-standard shift. To do this:
1. Store the receive frequency using the method already described under M
(it doesn't matter if a repeater offset is active).
AGE
2. Tune to the desired transmit frequency, then press and hold in the f key for 1/2
second.
3. Within five seconds of releasing the f key, rotate the DIAL knob to select the same
memory channel number as used in step "1" above.
4. Press and hold in the PTT switch, then briefly press the f key once more while
holding the PTT switch in (this does not key the transmitter).
Whenever you recall a memory, which contains in-
dependently-stored transmit and receive frequen-
cies, the "
1. While operating in the VFO mode, press the c key to
enter the Memory mode.
2. Rotate the DIAL knob to select the desired channel.
3. If you press the f key briefly, then rotate the DIAL knob,
the memory channel will be selected in 10 channels per step.
4. To return to the VFO mode, press the c key.
1 ) When the radio is already set to the Memory mode, an easy way to recall
memories is to key in the memory channel number, then press the c key.
For example, to recall memory channel #14, press 1 4
2) You may change the step of the fast channel selection mode ( f key + DIAL knob )
via Set Mode Item 47: MEMORY FAST STEP. See page 137 for details.
44
ODE R
EGULAR
M
EMORY
T
RANSMIT
" indication will appear in the display.
M
EMORY
M C
EMORY HANNEL
S
TORAGE
F "O
REQUENCIES
R
ECALL
VX-8GE O
O
PERATION
S "
DD PLITS
EMORY
c.
M
PERATING
S -
TOR
ANUAL