Husqvarna Rider Pro 18 AWD Operator's Manual page 78

Action
300-Hour Service
1. Inspect the machine. Additional work?
2. Change engine oil. Replace the oil filter every 200 hours.
3. Replace the air filter (foam plastic filter).
4. Replace the air filter (paper filter).
5. Clean the engine's cooling air intake and the transmission's air
intake.
6. Clean the cooling fins on the engine and transmissions.
7. Check the mounting bolts on the muffler.
8. Check/Adjust the cutting height.
9. Check/Adjust the parking brake.
10. Inspect the flame proofing/spark arrestor (extra equipment).
11. Clean/Replace the spark plugs.
12. Change the inline fuel filter.
13. Replace the hydraulic oil filter (every 200 hours) on Pro 18 and
AWD.
14. Clean the fuel pump's air filter.
15. Clean the pulse air filter.
16. Check the play in the engine valves.
17. Check nuts and screws for tightness.
18. Replace the suction filter in the hydraulic tank every 200 hours on
AWD.
19. Check whether the oil in the gearbox and hydraulic system needs
changing (every 200/500 hours). On Pro 18 also filter replacement.
76
– English
SERVICE JOURNAL
Date, mileage reading, stamp,
signature