NETGEAR R6300v2 User Manual page 65

2. Follow the instructions to install the NETGEAR USB Control Center utility.
3. Select the language and click OK.
The utility is installed
4. On each computer on your network that shares the USB printer, perform the initial setup of
the NETGEAR USB Control Center.
The first time you use the USB printer that is connected to your router, you are asked to
select the USB printer. For more information, see
Control Center on page 75.
5. (Optional) Change the default settings.
For more information, see
R6300v2 Smart WiFi Router
Configure the NETGEAR USB Control Center
ReadySHARE Printer
65
Initial Setup of the NETGEAR USB
on page 77.