Specify Approved Usb Devices - NETGEAR R6300v2 User Manual

Specify Approved USB Devices

For more security, you can set up the router to share only approved USB devices.
To set up approved USB devices:

1. Select ADVANCED > Advanced Setup > USB Settings.
2. Click the Approved Devices button.
This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.
3. In the Available USB Devices list, select the drive that you want to approve.
4. Click the Add button.
5. Select the Allow only approved devices check box.
6. Click the Apply button.
Your change takes effect.
If you want to work with another USB device, first click the Safely Remove USB Device
button for the currently connected USB device. Connect the other USB device, and repeat
this process.
R6300v2 Smart WiFi Router
USB Storage
58