Driving The Machine - Husqvarna ProFlex 18 ProFlex, 20 ProFlex Operator's Manual

Husqvarna lawn mower operator's manual
Table of Contents

Advertisement

5. When the engine starts release the ignition key
immediately back to neutral position.
IMPORTANT INFORMATION
Do not run the starter for more than about
5 seconds at a time. If the engine does not
start, wait about 10 seconds before trying
again.
6. Push the choke lever gradually forward when
the engine has started.
7. Set the required engine speed with the throttle
control.
!
WARNING!
Never run the engine indoors, in
enclosed or poorly ventilated areas.
The exhaust fumes contain toxic
carbon monoxide.

Driving the machine

1. Release the parking brake by pressing the brake
pedal.
2. Carefully press down one of the pedals until the
required speed is obtained.
To drive forward press down pedal (1), or to
reverse pedal (2).
14
– English
DRIVING
1
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rider 18 proflexRider 20 proflex

Table of Contents