Table of Contents
Advertisement
OPERATION
Making a Call
1 Press [
] on the handset and wait for the PHONE indicator to go on.
PHONE
2 When you hear a dial tone, dial the number.
NOTE: When another extension is in use on the same line, and the BC901
is in standby mode, the PHONE indicator on the handset will flash. The
IN USE/CHARGE indicator will not function when the handset is out of range.
Answering a Call
If the handset is in the base:
NOTE: The IN USE/CHARGE indicator will flash with the incoming ring.
1 Lift the handset.
2 The PHONE indicator goes on and the call will be connected.
If the handset is away from the base:
NOTE: The IN USE/CHARGE indicator will flash with each incoming ring.
Press any key on the handset (except [
], volume control or [
]). This is
MUTE
OFF
very useful in a dark environment: you do not have to fumble around looking
for the [
] key to answer the call.
PHONE
Headset Operation
Your BC901 is equipped with a 2.5mm headset jack used for plugging in an
optional headset top for hands-free communication. When the headset is
connected to the BC901, the handset transmitter is disabled.
Ending a Call
If you are near the base:
Place the handset in the base.
If you are away from the base:
Press [
].
OFF
8
Advertisement
Table of Contents
