Winter Storage; Torque Specifications - Husqvarna iZ4821KAA, iZ5223KAA, iZ5223TKOA, iZ4217TSKAA, iZ4817TSKAA, iZ6123KAA Operator's Manual

MAINTENANCE

Winter storage

To prepare the machine for storage. Clean the
machine, especialy under the deck. Touch-up the
paint or spray the underside of deck with a light
coat of oil.
Inspect the machine for damage and loose hard-
ware.
Change the oil.
Drain the fuel system or add stabilizer to fuel. Make
sure to run the machine after to circulate stabilizer
throughout system.
Remove the plugs and add 1 tablespoon of oil in
each cylinder. Install plugs and crank the engine
two or three revolutions.
Grease all zerks.
Remove battery and store inside and protect it from
freezing temperatures.

Torque Specifications

· Engine crankshaft bolt
· Deck pulley bolts
· Hydraulic tube nuts
· Wheel motor hub nut
· Lug nuts
· Blade bolt
· Standard ¼" fasteners
· Standard 5/16" fasteners
· Standard 3/8" fasteners
· Standard 7/16" fasteners
(seat belt)
· Standard ½" fasteners
(roll bar)
67 Nm(50 ft/lb)
61 Nm (45 ft/lb)
41 Nm (30 ft/lb)
122 Nm (90 ft/lb)
100 Nm (75 ft/lb)
122 Nm (90 ft/lb)
12 Nm (9 ft/lb)
25 Nm (18 ft/lb)
44 Nm (33 ft/lb)
70 Nm (52 ft/lb)
110 Nm (80 ft/lb)
25