Front Brake Lever - Yamaha YFM125GZ Owner's Manual

pushed to the maximum.
1. Loosen the locknut.
1
2. To increase the maximum engine power avail-
able and the maximum speed of the ATV, turn
2
the adjusting screw in direction (a). To de-
crease the maximum engine power available
3
and the maximum speed of the ATV, turn the
adjusting screw in direction (b). Do not turn
4
the adjusting screw out more than 12 mm
(0.47 in) or the throttle cable could be dam-
5
aged. Always make sure the throttle lever free
play is adjusted to 1.0–3.0 mm (0.04–0.12 in).
6
(See page 8-25.) WARNING! Improper ad-
justment of the speed limiter and throttle
7
could cause throttle cable damage or im-
proper throttle operation. You could lose
8
control, resulting in an accident.
9
10
11
1. Adjusting screw
2. Locknut
3. No more than 12 mm (0.47 in)
3. Tighten the locknut.
[EWB00241]
EBU18391

Front brake lever

The front brake lever is located on the right handle-
bar. To apply the front brake, pull the brake lever
toward the handlebar grip.
4-4
(a)
(b)
1
2
3