follows.
1. Remove the bulb holder (together with the
1
bulb) by turning it counterclockwise.
2
3
4
5
6
7
1. Tail/brake light bulb holder
8
2. Remove the burnt-out bulb by pushing it in
9
and turning it counterclockwise.
10
11
1
1. Tail/brake light bulb
2. Tail/brake light bulb holder
3. Insert a new bulb into the bulb holder, push it
4. Install the bulb holder (together with the bulb)
EBU25651
Removing a wheel
1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
8-46
2
1
in, and then turn it clockwise until it stops.
by turning it clockwise.