Shark S3501UKL Owner's Manual page 3

11. DO NOT unplug by pulling on
power cord. To unplug, grasp the
plug not the power cord. Do not
use extension cords or outlets
with inadequate current carrying
capacity.
12. DO NOT put any objects into
openings. Do not use with any
opening blocked.
13. DO NOT put hands or feet under
the steam mop. Unit gets very hot.
14. Use ONLY on flat, horizontal
surfaces. Do not use on walls,
counters or windows.
15. DO NOT use on leather, wax
polished furniture or floors,
synthetic fabrics, velvet or other
delicate, steam sensitive materials.
16. DO NOT add cleaning solutions,
scented perfumes, oils or any other
chemicals to the water used in this
appliance as this may damage the
unit or make it unsafe for use. If
you live in a hard water area, we
recommend using distilled water in
your steam mop.
17. When in use, NEVER turn the
appliance over or on its side.
NEVER DIRECT STEAM TOWARDS
PEOPLE, ANIMALS OR PLANTS.
18. NEVER LEAVE THE STEAM MOP
IN ONE SPOT ON ANY SURFACE
FOR ANY PERIOD OF TIME
WHEN MICROFIBRE POCKET IS
ATTACHED.
19. Carefully remove the microfibre
pocket immediately after you have
unplugged and allowed the steam
mop to cool.
20. When cleaning the steam mop,
unplug the power cord from the
electrical outlet and clean with a
dry or damp cloth. Do not pour
water or use alcohol, benzene or
paint thinner on the unit.
S3501UKL_IB_ENG_101006.indd 3
21. Extreme caution should be
exercised when using this
appliance to clean stairs.
22. Never use steam mop without
microfibre pocket attached.
23. Keep your work area well lit.
24. Store steam mop indoors in a cool,
dry place.
25. To avoid circuit overload, do not
operate another appliance on the
same socket (circuit) as the steam
cleaner.
26. If an extension cord is absolutely
necessary, an extension cord
rated a minimum of 2.5mm
and 4m in length should be used.
Cords rated for less amperage may
overheat. Care should be taken to
arrange cord so that it cannot be
pulled or tripped over.
27. DO NOT leave your Steam Mop
unattended when the system is
connected to a power supply
/electrical outlet.
28. DO NOT store unit with damp or
wet microfibre cleaning pocket
attached. Never leave the steam
mop in one spot on any surface
for any period of time with a damp
or wet microfibre cleaning pocket
attached as this will damage
your floors.
29 Always unplug and allow the steam
mop to cool before removing or
changing mop heads.
WARNING: Your steam mop
is designed to clean hard floor
surfaces that will withstand high
heat. Do not use on unsealed wood
or unglazed ceramic floors. On
surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by the
heat and steam action. It is always
recommended to test an isolated
area of the surface to be cleaned
before proceeding. We also
recommend that you check the use
and care instructions from the floor
manufacturer.
2 cord
www.lakeland.co.uk
10-10-06 2:29 PM