Suunto AMBIT2 2.0 User Manual page 48

6. Press [Next] to select Navigate.
7. If you selected a waypoint in the middle of the route, Suunto
Ambit2 prompts you to select the direction of the navigation.
Press [Start Stop] to select Forwards or [Light Lock] to select
Backwards.
If you selected the first waypoint as the starting point, Suunto
Ambit2 navigates the route forward (from the first to the last
waypoint). If you selected the last waypoint as the starting
point, Suunto Ambit2 navigates the route backwards (from the
last to the first waypoint).
8. If you are using the compass for the first time, you need to
calibrate it. For more information, see
After activating the compass, the watch starts searching for a
GPS signal and displays GPS found after acquiring the signal.
9. Start navigating to the first waypoint on the route. The watch
informs you when you are approaching the waypoint and
automatically starts navigating to the next waypoint on the
route.
10. Before the last waypoint on the route the watch informs you
that you have arrived at your destination.
48
10.1 Calibrating compass .