Husqvarna EZ4824 / 965880401 Operator's Manual page 27

Press in and turn the ignition key to the start position.
When the engine starts, immediately release the
ignition key back to the run position.
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
approximately 10 seconds before retrying.
Set the desired engine speed with the throttle. Allow
the engine to run at a moderate speed, "half throttle"
for 3-5 minutes before loading it too heavily. USE
FULL THROTTLE WHEN MOWING (no choke).
WARNING!
Engine exhaust and certain vehicle
components contain or emit
chemicals considered to cause
cancer, birth defects or other
reproductive system damage. The
engine exhaust contains carbon
monoxide, which is a odorless,
colorless, poisonous gas. Do not use
the machine in enclosed spaces.
OPERATION
Turn to the start position
Return to run position
Set the engine speed
STOP
STOP
UP
CHOKE
BLADES ON
DOWN
BLADES OFF
8050-780
8050-781
8056-001
27
Husqvarna-