Location Requirements; Electrical Requirements - Whirlpool PORTABLEAIR CONDITIONER Use And Care Manual

Location Requirements

NOTES:
■ The flexible exhaust hose allows placement of the air
conditioner between 19⁵⁄₈" and 64¹⁄₈" (60 cm and 163 cm)
from window or door.
■ Portable air conditioners are designed as supplemental
cooling to local areas within a room.
Vertical Slide Window
Horizontal Slide Window
■ To ensure proper ventilation, keep the required distance from
the return air outlet to the wall or other obstacles at least
19⁵⁄₈" (60 cm).
■ Do not block the air outlet.
■
Provide easy access to the grounded 3 prong outlet.
19⁵⁄₈" - 64¹⁄₈"
(60 cm - 163 cm)
19⁵⁄₈" - 64¹⁄₈"
(60 cm - 163 cm)

Electrical Requirements

■ The portable air conditioner should be connected to a 115 V,
60 Hz, 15-amp fused grounded 3 prong outlet.
■ The use of a time-delay fuse or time-delay circuit breaker is
recommended.
■ All wiring must comply with local and national electrical
codes and be installed by a qualified electrician. If you have
any questions, contact a qualified electrician.
Power Supply Cord
NOTE: Your air conditioner's device may differ from the one
shown.
A. Test button
B. Reset button
This room air conditioner is equipped with a power supply cord
required by UL. This power supply cord contains state-of-the-art
electronics that sense leakage current. If the cord is crushed, the
electronics detect leakage current and power will be
disconnected in a fraction of a second.
A
B
5