Bag Of Parts - Husqvarna C342B Owner's Manual

KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS
CATCHER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly.
Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to
prevent injury to yourself and others. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in
severe eye damage. Always wear safety glasses or eye shields before starting your tractor and
while mowing. We recommend a wide vision safety mask for over the spectacles or standard
safety glasses.
UNPACKING INSTRUCTIONS
• Remove all parts and packing materials from carton.
• Fold flaps to inside of carton and turn carton upsidedown
on floor of work area. To protect grass catcher cover
during assembly place cover upsidedown on overturned
carton.
• Check carton contents against list. Be sure all parts are
there.
NOTE: For ease of assembly, aside of your work area, lay out all hardware in the following groups. Each step of the assembly
instructions will identify the group needed for that step.
ASSEMBLY
LOCATION
GROUP "A"
REAR
(4) Shoulder Bolt 5/16 - 18 Self Tapping
MOUNTING
BRACKET
AND
SUPPORT
TUBE
TO
DRAW BAR
(2) Washer 11/32 x 1-1/2 x 10 Ga.
GROUP "B"
SUPPORT
POST
TO
COVER
ASSEMBLY
BAG OF PARTS CONTENTS
HARDWARE SHOWN ACTUAL SIZE
(2) Lock Washer 5/16
(3) Carriage Bolt 5/16 - 18 x 3/4
4
CARTON CONTENTS:
(3) Container Tops
(3) Container Bottoms
(1) Upper Chute
(1) Lower Chute
(1) Support Post
(4) Bolt 5/16 - 18 x 3/4
(2) Wing Nut
NOT SHOWN FULL SIZE
(3) Locknut 5/16-18
(1) Support Tube
(1) Mounting Bracket
(1) Cover Assembly
(1) Cover Seal

(1) Bag of Parts

(1) Owner's Manual
(4) Locknut 5/16-18
(1) Support Plate