Bag Of Parts - Husqvarna C342B Owner's Manual

KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS
CATCH ER, Compare the illustrations with the carton contents to familiarize yourselfwith the parts before starting the assembly,,
Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to
prevent injury to yourself and others, Save this manual for future reference,,
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in
severe eye damage+ Always wear safety glasses or eye shields before starting your tractor and
while mowing. We recommend a wide vision safety mask for over the spectacles or standard
safety glasses..
UNPACKING INSTRUCTIONS
-
Remove all parts and packing materials from carton.
. Fold flaps to inside of carton and turn carton upsidedown
on floor of work area,. To protect grass catcher cover
dudng assembly place cover upsidedown on overtumed
carton.
• Check carton contents against lisL Be sureall parts are
there..
CARTON CONTENTS:
(3) ContainerTops
(3) Container Bottoms
(1) Upper Chute
(1)Lower Chute
( ! ) Support Post
( 1) Support Tube
(t) Mounting Bracket
(t) Cover Assembly
(l) Cover Seal
(1) Bag of Parts
( t ) Owner's Manual
NOTE: For ease of assembly, aside of your work area, lay out all hardware in the following groups. Each step of the assembly
instructions wil! identify the group needed for that step..
BAG OF PARTS CONTENTS
ASSEMBLY HARDWARE SHOWN ACTUAL SIZE
LOCATION
REAR
MOUNTING
BRACKET
AND
SUPPORT
TUBE
TO
DRAW BAR
SUPPORT
POST
TO
COVER
ASSEMBLY
(4) Shoulder Bolt 5116 - 1
i...... Iililil+l lIllli]t
(4) Bolt 5/16 - 18 x 3!4 (4) Locknut 5/16-'18
(2) Washer 11132 x 1-1/2 x 10 Ga°
(2) Wing Nut
(2) Lock Washer 5/16
J
(1) Support Plate
NOT SHOWN FULL SIZE
J
"B"I
(3) Carriage Bolt 5/16 - 18 x 3/4
(3) Locknut 5/16-18
+ +
E
F
E
4