Installation - Husqvarna B1100028 Software Manual

Installation

Use Autocheck EXP (part number 577 85 81-01) to make an automatic programming of the new
main software and MMI software. Former Autocheck 9.X can not be used with Automower
Please follow below guide for how to make an automatic programming in Autocheck EXP.
1. Start and login to Autocheck EXP.
2. Check that there are no uninstalled updates of Autocheck EXP. If there is any update avail-
able, install it before continue to step 3.
3. Check that channel G3 is selected at the bottom left corner of the Autocheck EXP window.
4. Switch on the Automower
number 577 51 81-01).
5. Confirm that Autocheck EXP establish connection with the mower. At the bottom of the
Autocheck EXP window the model name (305) and serial number should be visible.
305 and connect it to Autocheck EXP via a USB cable (part
®
SERVICE
5
B1100028
English 4 (5)
305.
®