Adjustable Shelves - GE Side by Side 22’ & 24’ Use & Care Manual

3. Pull the drawer partway out.
Reach in, push the rear of the glass
up and, at the same time, push it
back until it clears the front corner
retainers.
4. Tilt and remove the cover.
Pull the drawer forward, lift the
5.
front to clear stops, and remove the
drawer. If the refrigerator door
doesn't open completely, pull the
drawer out until it hits the door.
Then lift the drawer up until it is
higher than the drawer supports,
tilt it and take it out.
If tape holds Conve~lible Meat
6.
Pan cover to drawer supports,
remove the tape. Pull drawer
partway out. Reach in, push the
rear of the glass up and, at the same
8. Tilt and remove the drawer.
After cleaning, replace in reverse
order.
9. Reinstall the gasket at the rear of
the Moist 'n Fresh drawer. Fit the
end of the plastic drawer support
into the slot on the gasket, with the
rubber gasket flap facing you. Make
sure the gasket snaps into place.
Sealed Snack Pack
(on models so equipped)
The Sealed Snack Pack—and
shelf to which it is attached-can
be relocated within the Fresh Food
compartment. The sealed drawer
retains high humidity for convenient
storage of meats and cheese, bacon,
hors d'oeuvres, spreads and snacks.
11
Shelf Positions
How to Rearrange
Your Shelves

Adjustable Shelves

Shelves in the fresh food and
freezer compartments are adjustable,
enabling you to make efficient shelf
arrangements to fit your family's
food storage needs.
Tempered Glass Shelves in
Fresh Food Compartment
To remove shelves: Tilt shelf up
at front, then lift it up and out of
tracks on rear wall of refrigerator.
lock into place
To relocate shelves: Select desired
shelf height. With shelf front raised
slightly, engage top lugs in tracks at
rear of cabinet. Then lower front of
shelf until it locks into position.