Front Turn Signal, Sidemarker And Daytime Running Lamps - GMC Sierra 2005 Owner's Manual

A. Low-Beam Headlamp
B. High-Beam Headlamp
3. Pull the headlamp assembly out.
4. Unplug the electrical connector.
5. Turn the old bulb counterclockwise and remove it
from the headlamp assembly.
6. Install the new bulb into the assembly and turn it
clockwise until it is tight.
7. Plug in the electrical connector.
8. Reinstall the headlamp assembly.
9. Reinstall and tighten the two pins. If your
vehicle has one pin, reinstall it and turn it into the
locking feature.
5-62
Front Turn Signal, Sidemarker and
Daytime Running Lamps
A. Sidemarker Lamp
B. Retainer Clip
C. Front Turn Signal Lamp
D. Daytime Running Lamp (DRL)
To replace a front turn signal, sidemarker or DRL bulb,
do the following:
1. Open the hood. See Hood Release on page 5-13
for more information.
2. Remove the headlamp assembly as described
previously. See Headlamps on page 5-61 for
more information.