Where To Go From Here - HP ProCurve 1700-8 Installation And Getting Started Manual

In General tab, under Components checked are used by this connection,
3.
click to select Internet Protocol (TCP/IP), and then click Properties to
open Internet Protocol (TCP/IP) Properties dialog box.
In Internet Protocol (TCP/IP) Properties dialog box, click to select Use
4.
the following IP address.
In IP address, Subnet mask, and Default gateway, type your intended
5.
information.
Click OK to save the changes and quit.
6.

Where to Go From Here

For more information on the Web browser interface and all the
features that can be configured on the ProCurve Switch 1700-8, see
the ProCurve Series 1700 Switch Management and Configuration
Guide, which is available on the ProCurve Networking Web site,
http://www.procurve.com
.
Configuring the Switch
Where to Go From Here
3-3