Checking The Brake; Adjusting The Brake; Checking The Battery Acid Level; Checking The Safety System - Husqvarna 850 Operator's Manual

Checking the brake

The brake is of the disc brake type and is fitted on
the gearbox.
Check that the brake is correctly adjusted by meas-
uring the distance between the brake lever and the
front edge of the recess on the chassis.
The distance should be 0–1 mm when the brake is
not applied.

Adjusting the brake

1. Release the lock nuts (1).
2. Tension the wire with the adjusting screw (2) so
that the distance between the brake lever and
the front edge of the recess on the chassis is
1 mm.
3. Tighten the lock nuts (1) after adjustment.
!
WARNING!
Poorly adjusted brakes can result
in reduced braking power.
Check the level of the battery acid
Check that the level of the battery acid lies between
the markings. Top up the cells with distilled water
only.
!
WARNING!
Procedures on contact with acid
External: Rinse well with plenty of water.
Internal: Drink large quantities of water or
milk. Contact a doctor as soon as
possible.
Eyes: Rinse well with plenty of water. Con-
tact a doctor as soon as possible.
Batteries emit explosive gas. Sparks, flames
and cigarettes must absolutely not be
brought into the vicinity of the battery.
Check the safety system
The machine is equipped with a safety system
which prevents starting the cutting unit or driving
the machine unless someone is sitting in the seat.
Check daily the safety system functions.
MAINTENANCE
2
1
1
E
23
English –