Lift Lever For Cutting Unit; Lever For Adjustment Of Cutting Height - Husqvarna 850 Operator's Manual

E

Lift lever for cutting unit

The lift lever is used to set the cutting unit in trans-
port or cutting position.
If the lever is pulled back the unit will lift up and the
blades stop rotating (transport position).
If the lock button is pressed and the lever is moved
forward the unit will lower down and the blades
begin rotating (cutting position).
The lever can also be used to temporarily regulate
the cutting height, e.g. for a small mound in the
lawn.

Lever for adjustment of cutting height

With this lever the cutting height can be adjusted to
9 different positions (40–90 mm, 45–80 mm
Bioclip).
12
– English
PRESENTATION
Lifting of the cutting unit (transport position)
Lowering of the cutting unit (cutting position)