8-22 Troubleshooting
Problems with Parameter File Creator
Fail to start Parameter File Creator:
Parameter File Creator requires to run by "Microsoft(R) HTML Application host".
→ If Parameter File Creator does not start, associate the file type with "Microsoft(R)
HTML Application host" via following process.
1) Click [Run] on Start menu.
2) Type "%windir%\system32\mshta.exe /register" in the [Open] box, and click
Problem with Disk Array Configuration
Refer to the manuals in the NEC EXPRESSBUILDER DVD for any trouble occurred on disk array
in this system.
Problems with RAID System and RAID Controller
Physical device is not correctly displayed on Universal RAID Utility:
→ If you use N8403-027 SATA interface card, a part of information on a physical
device is not correctly displayed on Universal RAID Utility.
It is no problem.
Cannot enter standby:
→ If you use N8403-027 SATA interface card, system may not enter standby with
heavy I/O.
Cannot enter Hibernation:
→ If you use N8403-027 SATA interface card, system may not enter Hibernation
with heavy I/O.
[OK].