Pontiac G3 2010 Owner's Manual page 269

Front Turn Signal, Sidemarker and
Parking Lamps
To replace a front turn signal or parking lamp bulb:
1. Open the hood. See Hood Release on page 6 12
for more information.
2. Remove the three bolts to remove the headlamp
assembly.
3. Disconnect the wiring harness connector from the
rear of the bulb.
4. Turn the front turn signal bulb socket
counterclockwise.
5. Pull the front turn signal bulb socket out of the
lamp housing.
6. Press the bulb inward and turn it counterclockwise
to remove it from the bulb socket.
7. Install the new bulb into the socket by pressing it in
and turning it clockwise.
8. Install the socket into the lamp housing by turning
it clockwise.
9. Reconnect the wiring harness connector at the rear
of the bulb.
6-45