REQUIRED SAFETY
EQUIPMENT
When using this tool the following
safety equipment MUST be worn!
If you do not have this
DO NOT USE THE MACHINE
VERSION 5/2014
SAFETY GLASSES
SAFETY GLOVES
SAFETY MASK
SMITH Manufacturing
SAFETY GUIDELINES
• Read all instructions before using the tool. all
operators must be fully trained in its use and
aware of these safety rules.
• DO NOT exceed the Maximum working
pressure of 100psi
• Use ONLY compressed air at the
recommended conditions
• If the tool appears to malfunction, remove
from use immediately and arrange for service
and repair
• If the tool is used with a balancer or other
supporting device ensure that it is fixed
securely
• Always keep hands away from the working
attachment fitted to the tool
• The tool IS NOT electrically insulated.
NEVER use tool if there is any chance of it
coming into contact with live electricity
• Always when using the tool adopt a firm
footing and/or position and grip the tool firmly
to be able to counteract any forces that may
be generated while using the tool
• Use only the correct spare parts. Do not
improvise or make temporary parts
• Do not lock, tape, wire etc the ON/OFF valve
in the run position. The trigger/lever must
always be free to return to the off position
when it is released
• Always shut off the air supply to the tool and
depress the trigger/lever to exhaust air from
the feed hose before fitting, adjusting or
removing the working attachment
• Check hose and fittings regularly for wear,
replace if necessary
• Always use a suitable vacuum cleaner or
dust extraction unit
1-954-941-9744
www.SmithMfg.com
FS150
-PNEUMATIC-
3