Fn1 Substitution Values - Symbol DS3408 Product Reference Manual

14 - 6 Symbol DS3408 Product Reference Guide
Scan Data Transmission Format (continued)
<PREFIX> <DATA> <SUFFIX 2>

FN1 Substitution Values

Key Category Parameter # 67h
Decimal Value Parameter # 6Dh
The Wedge and USB HID Keyboard hosts support a FN1 Substitution feature. When enabled any FN1 character
(0x1b) in an EAN128 bar code is substituted with a value. This value defaults to 7013 (Enter Key).
When using host commands to set the FN1 substitution value, set the key category parameter to 1, then set the
3-digit keystroke value. See the ASCII Character Set table for the currently installed host interface for the desired
value.
To select a FN1 substitution value via bar code menus:
Scan the bar code below.
1.
Look up the keystroke desired for FN1 Substitution in the ASCII Character Set table for the currently installed
2.
host interface. Enter the 4-digit ASCII Value by scanning each digit in
To correct an error or change the selection, scan Cancel.
(06h)
Set FN1 Substitution Value
<PREFIX> <DATA> <SUFFIX 1>
(05h)
<PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2>
(07h)
Appendix D, Numeric Bar Codes.