Checking The Remaining Media; Checking The File Name; Checking The Time Code; Assigning Functions To The Assign Buttons - Sony F65 Operation Manual

For details, see "3-7-3 Setting the Voltage Warning
Values" (page 46).
3-3-11 Checking the Remaining
Media
When the SR-R4 recorder is docked with the camera, an
estimate of the remaining recording time (recording units:
minutes) on the memory card can be checked on settings
page 2 on the subdisplay.
Settings page 2

3-3-12 Checking the File Name

When the SR-R4 recorder is docked with the camera, the
file name can be checked on Settings page 2 on the
subdisplay.
The [NEXT] display shows the name of the file to be
created next when stopped (STOP) or paused
(REC_Pause).
Settings page 2
File name

3-3-13 Checking the Time Code

When the SR-R4 recorder is docked with the camera, the
SR-R4 time code can be checked on settings page 2 on the
subdisplay.
Settings page 2
Time code display types
Indication
TCG 00:00:00:00 Time code generator's time code data.
Media remaining
TCR 00:00:00:00
UBG 00 00 00 00 Time code generator's user bit data.
UBR 00 00 00 00 LTC or VITC reader user bit data. LTC or
TM1 00:00:00:00
TM2 00:00:00:00
3-3-14 Assigning Functions to the
ASSIGN Buttons
Separate functions can be assigned to each of the ASSIGN
buttons 1 to 4 on the side of the camera body.
The following functions are assigned to the buttons by
factory default.
Button
ASSIGN 1
ASSIGN 2
ASSIGN 3
ASSIGN 4
Time code
Meaning
DF or NDF is displayed, depending on
the time code type.
LTC or VITC reader time code data. LTC
or VITC is displayed on the right. Also,
DF or NDF is displayed, depending on
the time code type.
VITC is displayed on the right.
Timer1 timer value.
Timer2 timer value.
Function
Mag
Mag Position
Hi/Lo Key
Rec Review
Basic Settings using the Subdisplay
37