To Remove The Battery Pack; Checking The Remaining Battery Charge - Sony CYBER-SHOT DSC-TX5 Instruction Manual

x When there is no memory card inserted
Images are stored in the camera's internal memory (approximately 45 MB).
To copy images from the internal memory to a memory card, insert a memory
card in the camera, then touch
Tool) t [Copy].
x

To remove the battery pack

Battery eject lever
x
Notes on the multi-connector cover
To open the multi-connector cover, first open the battery/memory card cover.
Then, pull the notch on the left side of the multi-connector cover out with the
fingernail. Close the multi-connector cover firmly, then the battery/memory
card cover.
Multi-connector cover
x

Checking the remaining battery charge

A remaining charge indicator appears on the LCD screen.
High
Notes
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct under certain circumstances.
• When [Power Save] is set to [Standard] or [Stamina], if you do not operate the
camera for a certain period of time while the power is on, the LCD screen becomes
dark, then the camera turns off automatically (Auto power-off function).
• To keep clean battery pack terminal and prevent short-circuiting, place the battery
pack in a plastic bag, etc. when carrying and storing to isolate it from other metal
objects, etc.
t (Settings) t
Slide the battery eject lever. Be sure not
to drop the battery pack.
Low
(Memory Card
GB
GB
19