4 Replacement Procedures
4.15 Smart Card unit
Removing the Smart Card unit
The following describes the procedure for removing the Smar Card unit. (See Figure 4-SC5.)
1. Push the hook in a cover assembly and slide the Smart Card unit in the direction in
the figure below to remove it.
Hook
Installing the SmartCard unit
The following describes the procedure for removing the SmartCard unit. (See Figure 4-SC5.)
1. Insert the SmartCard unit into the guides of the cover assembly until the hook is
engaged.
4-50
[CONFIDENTIAL]
Figure 4-SC5 Removing the SmartCard unit
4.15 Smart Card unit
Smart Card unit
Guide
TECRA M9 Maintenance Manual (960-631)