Setting The Nitrox Values - Suunto D4i User Manual

NOTE

5.9.1. Setting the nitrox values

If set to the NITROX mode, the correct oxygen percentage of the gas in your cylinder
must always be entered into the computer to ensure correct nitrogen and oxygen
calculations. In addition, the oxygen partial pressure limit must be set. When in the
NITROX setting mode, the maximum operating depth (MOD), based on the chosen
setting, will also be displayed.
The default oxygen percentage (O
(PO ) setting 1.4 bar.
2
NOTE
Some settings cannot be changed until five (5) minutes has
elapsed after the dive.
%) setting is 21% (air) and oxygen partial pressure
2
BUTTONS. ACCEPT
WITH SELECT
If the oxygen content of a mix is set to 22% or above, the setting
will remain stored until changed; it does not automatically revert
back to 21%.
ADJUST WITH
UP AND DOWN
BUTTON.
43