Commissioning Your Power Chair - Invacare PT2000 Owner's Manual

COMMISSIONING YOUR POWERCHAIR
Following is the recommended procedure for commissioning your power chair.
It covers the details for unfolding the Power chair, fitting the control system, the batteries,
and the leg rests, and finally placing the Power chair in gear.
Should it become necessary to fold your Power chair for transportation or storage? (See
page 8)
On receipt of your Power chair unpack the box and lay out, the following items will be
required Wheelchair frame complete with motors, gearboxes, armrests fitted and
upholstery.
One pair of leg rests
One battery tray
Two battery boxes complete with batteries or one battery box complete with batteries.
(Usually packed in a separate box)
One pair of anti tippers
One controller (Attached to chair)
Owner's manual
Two battery boxes
Battery Tray
If you require assistance in commissioning your Powerchair, ring Invacare New
Battery Charger
One pair of leg rests
Zealand on Free phone 0508 468 2227
Joystick
Horn
Anti
tippers
Shark Controller
Speed
Controller
3