5-Screens And Menus; Operation Screen; Playback - Tascam HD-R1 Owner's Manual

5–Screens and Menus

Operation Screen

Playback

This is the screen you will see when the HD-R1 is first
powered up and is the main screen for operating and
monitoring the HD-R1.
1 Metering
Displays instantaneous and peak audio levels
during playback and recording along with overload
indicators. The audio meter characteristics are
configurable in
Main Menu ˘ System
Settings ˘ Metering
on the meter scale shows the analog reference level
as determined by
Main Menu ˘ System
Settings ˘ Ref Level.
2
Pre-Recording
Indicates the percentage of the pre-record buffer
filled. Pre-record time varies from 20 seconds
down to 10, depending on sample rate. When pre-
record is enabled, this bar is updated when the
transport is in ready-to-record mode.
3 Time Display
Displays "hours:min:seconds:hundredths" showing
either the total time, total time remaining, current
track time, or current track time remaining.
No Icon The elapsed time of the current track
is shown.
"R" icon The remaining time of the current
track is shown.
"T" icon The elapsed time from the beginning
of the play area is shown.
"R" and The remaining time in the play area is
"T" icons shown.
NOTE
When playback or recording exceeds 99 hours, the display
shows "99".
4 Current Track
Shows the current track.
5 Shuttle Mode
Indicates the current
SHUTTLE/DATA
No icon Track/Mark only
Underbar Hours, minutes, seconds, hundredths
14
TASCAM HD-R1
. A small tick mark
selection.
6 Playback Mode
Shows the playback mode.
"A" icon All
"F" icon Folder
"P" icon Playlist
"S" icon Single
7 Reference Level
Shows the current reference level.
8 Current
Shows the currently active folder/playlist, and
marker. The marker is based on transport location
and will appear and disappear accordingly.
9 Repeat Icon
Icon shows the ON state.
0
Random Icon
Icon shows the ON state.
q Auto Cue Icon
Icon shows the ON state.
w Auto Ready Icon
Icon shows the ON state.
e Transport
Icons showing the current transport state.
r Panel lock
Icon shows the ON state.
t Recording Space Icon
Displays the remaining time left for recording on
the media.