Packet Data; Calls And Phone - Nokia 2680 slide User Manual

1. Select My phone's name and enter a name for your phone.
2. To activate Bluetooth connectivity select Bluetooth > On.
Bluetooth is active.
3. To connect your phone with an audio enhancement, select Search for audio
enhancements and the device to which you want to connect.
4. To pair your phone with any Bluetooth device in range, select Paired devices >
Add new device.
Scroll to a found device, and select Add.
Enter a passcode (up to 16 characters) on your phone and allow the connection on
the other Bluetooth device.
If you are concerned about security, turn off the Bluetooth function, or set My phone's
visibility to Hidden. Accept Bluetooth communication only from those you trust.
PC connection to the internet
Use Bluetooth technology to connect your compatible PC to the internet without PC Suite
software. Your phone must have activated a service provider that supports internet
access, and your PC has to support Bluetooth personal area network (PAN). After
connecting to the network access point (NAP) service of the phone, and pairing with
your PC, your phone automatically opens a packet data connection to the internet.

Packet data

General packet radio service (GPRS) is a network service that allows mobile phones to
send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity > Packet
data > Packet data connection and from the following options:
● When needed — to establish the packet data connection when an application needs
it. The connection is closed when the application is terminated.
● Always online — to automatically connect to a packet data network when you
switch the phone on
You can use your phone as a modem by connecting it to a compatible PC using Bluetooth
technology. For details, see the Nokia PC Suite documentation.

Calls and phone

Select Menu > Settings > Call.
To forward your incoming calls, select Call forwarding (network service). For details,
contact your service provider.
To make ten attempts to connect the call after an unsuccessful attempt, select
Automatic redial > On.
To have the network notify you of an incoming call while you are in a call, select Call
waiting > Activate (network service).
© 2008 Nokia. All rights reserved.
indicates that
19